Beneficiation Equipment
Home > Product > Beneficiation Equipment >

Product Introduction

The main part of the spiral classifier is semicircular sink, steel and steel plate welded into, feed inlet, the upper end of the lower part of the tank there is sand return port on the side wall of the central tank. The main part of the spiral classifier is half round sink, steel plate and steel welded with inlet on the side wall of the central tank, the upper end of the lower part of the tank there is sand return port. Spiral classifier spiral number of helical axis can be divided into single and double spiral classifier, according to the height of the weir can be divided into high weir type, low weir, sinking. Widely used in the concentrator and mill closed cycle process dubbed shunt ore, or gravity concentrator to grade ore and fine mud, and metal beneficiation processes for pulp particle size classification, and washing off the mud job, dehydration and other operations.
Production capacity: 1410t / 24h
Use: apply to the concentrator and mill closed cycle process dubbed shunt ore, or gravity concentrator to grade ore and fine mud, and metal beneficiation processes for pulp particle size classification, and washing off the job mud, dehydration and other operations.

Grader running before the examination

  1. Before driving the machine to check the reducer oil adequacy of the bearing housing, motor bearings for refueling.
  2. The electrical instrument is normal, the switch is a good safety device is reliable.
  3. The belt is moderate, all screws are tightened the top wire, coupling is intact, whether the blade fracture. Are there serious stent deformation, overflow tank flow.
Technical Parameter:
Model Screw Diameter(mm) Screw Rotational Speed(r/min) Length of Water Channel (mm) Moto Power (kw) Overall Dimension (mm) Weight (t)
Driving Up and Down Length Width Height
FG-3 300 12-30 ≤ 3000 1.1 —- 3850 490 1140 ≤0.7
FG-5 500 8-12.5 ≤ 4500 1.1 —- 5430 680 1480 ≤1.9
FG-7 750 6-10 ≤ 5500 3 —- 6720 980 1820 ≤3.1
FG-10 1000 5-8 ≤ 6500 5.5 —- 7590 1240 2380 ≤4.9
FC-10 ≤ 8400 7.5 9600 1240 2680 ≤6.2
FG-12 1200 4-6 ≤ 6500 7.5 2.2 8180 1570 3110 ≤8.5
FC-12 ≤ 8400 7.5 2.2 10370 1540 3920 ≤11.0
2FG-12 ≤ 6500 15 4.4 8230 2790 3110 ≤15.8
2Fc-12 ≤ 8400 15 4.4 10370 2790 3920 ≤17.6
FG-15 1500 4-6 ≤ 8300 7.5 2.2 10410 1880 4080 ≤12.5
FC-15 ≤ 10500 7.5 2.2 12670 1820 4890 ≤16.8
2FG-15 ≤ 8300 15 4.4 10410 3390 4080 ≤22.1
2FC-15 ≤ 10500 15 4.4 12670 3370 4890 ≤30.7
FG-20 2000 3.6-5.5 ≤ 8400 11-15 3 10790 2530 4490 ≤20.5
FC-20 ≤ 12900 11-15 3 15610 2530 5340 ≤28.5
2FG-20 ≤ 8400 22-30 6 11000 4600 4490 ≤35.5
2FC-20 ≤ 12900 22-30 6 15760 4600 5640 ≤48.7
FG-24 2400 3.67 ≤ 9130 15 3 11650 2910 4970 ≤26.8
FC-24 ≤ 14130 18.5 4 16580 2930 7190 ≤41.0
2FG-24 ≤ 9130 30 6 12710 5430 5690 ≤45.8
2FC-24 ≤ 14130 37 8 17710 5430 8000 ≤67.9
2FG-30 3000 3.2 ≤ 12500 40 8 16020 6640 6350 ≤73.0
2FC-30 ≤ 14300 17091 8680 ≤84.8

pre:Rotary Dryer next:Magnetic Separator
Contact us
+86-371-55912969
[email protected]